Okay i bought a used s-trim and its install just need to tap a hole in the oil pan and connect up the lines. my question is that - the guy i bought it off of never sent me the vortech coil relocation bracket. so i made my own, only problem is that the maf sensor won't fit in the stock location cause the coil plugs are in the way. i want the maf in the stock location. this is the first question. do i just cut the length of the black tubethat connects to the vortech shinny elbow so my maf will fit??? heres the other question-- since the coil is in the road i want to mount it somewhere else. one i will need to added some length to the wires i know that. but where could i mount the coil else where? also where could i buy just one plug wire that i could use for the coil and ignition? Thanks