Motor is coming together.. Questions on setup and what else i need..

Reply Subscribe

Thread Tools

Search this Thread

09-06-2004, 02:50 AM

CoUnTryMuZiCZ28

Registered User

Thread Starter

Join Date: Jul 2003

Location: Davie FL

Posts: 1,416

Motor is coming together.. Questions on setup and what else i need..

Finally my motor is starting to come together and will be ready this friday or maybe monday depending on the hurricane coming (ivan is its name). Well any how this is my setup: 359 (.040 over and a 3.50 stroke) with a 8.5:1 CR fully forged. The cam in running 224/236 .536/.555 114lsa.. Im going to be running trick flow heads, non ported, just out of the box heads with a valve job and new liners. I have a semi ported Lt1 manifold thats going on top. 1.6RR and all.. I still need a fuel pump though and I dont know which one to get, i have the t rex too. I also have 42Lb injectors which i dont know if those will be enough. I have an FMU but I dont know if I should use that either. The SC is pullied for 14psi but im running twin ATI intercoolers so I should see about 12 psi at the manifold. Can anyone help me out? I really dont know what to do here.. Can anyone see my problem, I dont feel im explaining it very well.. I also dont want to run an after market computer, I would like to stay with the stock computer and the High imp injectors. Please some one guide me in the right direction.. please...
thanks..
Nick

Last edited by CoUnTryMuZiCZ28; 09-06-2004 at 02:53 AM.