I've got 220 AFR heads. building 396 stroker. I'm going to run a procharger. where can I get a intake that will take care of my needs. Need one that comes in from 4000 to 8000. Any help will
be appreciated!!!!!!!!!!!!!!!!!

 

I believe the 220 AFR's will require the LT4 intake, that is your only choice, unless these are SBC heads.

Bill

 

Hmm, I could be confused but i'm running 220 afr's with a stock ported intake.
.

 

Well then you must be confused

AFR recommends the LT4 intake, as the 220 heads are LT4 heads... Can you get a LT1 intake to work, I would imagine with some grinding... I am not 100% sure on the actual differences between the two, so maybe someone else can chime in who knows.

 

It's pretty clear on afr's site i must have got the 180's with afr's full cnc port and revkit.

Sorry for the post..

 

I run their 190's for the LT1... I wonder why they don't make them anymore? well they aren't on the website anymore, anyone know why?

Bill