who's runin the mcleod single disk and lt4 pp?
#1
who's runin the mcleod single disk and lt4 pp?
I know this prolly belongs in the drivetrain section but it may get more traffic here. Anyway i think i'm going with that combo in a few weeks and i would like to know how its holding for you guys that have it. I can get the whole setup for less than 400 so i think it's a good deal. I was lookin at the spec 3 before but its over 100 more and ive heard mixed reviews about it. BTW i'm gonna run a cc306 and headers this spring, will it hold up?
#3
Re: who's runin the mcleod single disk and lt4 pp?
Originally posted by zx1216
I know this prolly belongs in the drivetrain section but it may get more traffic here.
I know this prolly belongs in the drivetrain section but it may get more traffic here.
Also, please wait at least 24 hours before bringing your post back to the top... it isn't fair to the other members here. Thanks!
#5
I have that setup. I have the performance disk and the lt4 pressure plate. At the moment i am having problems getting my clutch to disengage fully. Dont know if its something to do with the disk or pressure plate or if its b/c i had the flywheel resrfaceD.
Mcleod does have excellent customer service.
Mcleod does have excellent customer service.
#6
I have that set-up. It is not installed yet, as I am now trying to decide if I want to go ahead and get the SLP flywheel. And my clutch mysteriously started playing nice again. Here is a thread I started a couple of months ago:
http://web.camaross.com/forums/showt...hreadid=178247
http://web.camaross.com/forums/showt...hreadid=178247
#7
The single disk setup w/ the high performance disk is very good. Had mine for a for a year and a half. Dont go w/ the slp, they dont last. I had an slp before and it lasted a 2 weeks before i went to the track and within 3 runs on street tires it started to slip.
Thread
Thread Starter
Forum
Replies
Last Post
RX Speed Works
Supporting Vendor Group Purchases and Sales
3
10-01-2015 10:19 PM