96 z28 m6. ok, last year, every once in a while i'd have touble getting into reverse, sometimes i'd really have to stomp down on the clutch and jam it in, but only every once in a while. a few months later i blew my stock clutch, then parked car over winter. spring i had slp clutch installed, i could drive it fine, but others had problems, place that installed my clutch told me it wasn't fun to drive cause it was losing hydraulic pressure 'cause of slave cylinder....i had new slave installed, still doing same thing, difficult to drive for some people but not as bad. sometimes when i'm in a drive through even w/ my foot right to the floor on the clutch it starts to grab and it just wants to go, and then it's so difficult that sometimes you can barely pull it out of gear. reverse is also still difficult to get into gear 75%of the time(only gear that's difficult)
Please help! any input is appreciated