T56 to A4 swap
Thread Starter
Registered User
Joined: Dec 2000
Posts: 2,442
From: Tacoma, WA, USA
T56 to A4 swap parts listing please?
I have a guy that wants to swap over to an A4 on his 4th gen F-body. Apparently the car was given to him by his brother after he removed the transmission. They left the trans outside and it got stolen.
What are all the parts needed to make this swap possible? I will need a PCM out of an auto car won't I? Any special lines, tubes, wiring harnesses, pieces etc. we'll need for this? I've messed with plenty of T56 cars, which I'm trying to convince him to stick with, but I don't have much experience with the A4's.
I'm not afraid to do the work, I just need a good parts listing so we'll have everything in hand when we go to do the work.
What are all the parts needed to make this swap possible? I will need a PCM out of an auto car won't I? Any special lines, tubes, wiring harnesses, pieces etc. we'll need for this? I've messed with plenty of T56 cars, which I'm trying to convince him to stick with, but I don't have much experience with the A4's.
I'm not afraid to do the work, I just need a good parts listing so we'll have everything in hand when we go to do the work.
Last edited by Compstall; Jan 29, 2008 at 03:54 PM.
Registered User
Joined: Jan 2008
Posts: 466
From: Cypress, TX
I have a guy that wants to swap over to an A4 on his 4th gen F-body. Apparently the car was given to him by his brother after he removed the transmission. They left the trans outside and it got stolen.
What are all the parts needed to make this swap possible? I will need a PCM out of an auto car won't I? Any special lines, tubes, wiring harnesses, pieces etc. we'll need for this? I've messed with plenty of T56 cars, which I'm trying to convince him to stick with, but I don't have much experience with the A4's.
I'm not afraid to do the work, I just need a good parts listing so we'll have everything in hand when we go to do the work.
What are all the parts needed to make this swap possible? I will need a PCM out of an auto car won't I? Any special lines, tubes, wiring harnesses, pieces etc. we'll need for this? I've messed with plenty of T56 cars, which I'm trying to convince him to stick with, but I don't have much experience with the A4's.
I'm not afraid to do the work, I just need a good parts listing so we'll have everything in hand when we go to do the work.
http://ls1tech.com/forums/showthread.php?t=821133
check the first listing.
Thread
Thread Starter
Forum
Replies
Last Post
gonzo275rltw
LT1 Based Engine Tech
4
Sep 5, 2015 06:26 PM
gonzo275rltw
LS1 Based Engine Tech
2
Sep 5, 2015 06:24 PM