I just got this thing, and I'm pulling the 3.45 gears out for some 4.30's. The question I have, is how do I get the axles out? I can have a 10 bolt in pieces in no time, but I can't figure out how the axles come out so that I can remove the center section. I've done it with drum brakes, but this is different.

 

it should have 4 bolts on the ends of the housing.take them out and you may have to tap out the axles with a hammer.

 

I get it. That's why the hole is there in the end of the axle, so you can spin it and take those 4 nuts off. I'll try that tomorrow. One thing that sucks about setting the clocks back one hour is it gets dark at 5:30. Thanks for the help.