I have a 2000 SS T56

do you think it would be tricky to change out the tranny mount with just jack stands and a floor jack?? Or bite the 20.00-30.00 bullet and take it to lift.


Thanks for the help

 

Shouldn't be a problem, save the $.

 

http://www.installuniversity.com/ins...y_mount_m6.htm

 

Thanks VALTER


one problem... I have 2000 Camaro ?? what hell could be the difference in tranny mounts from other years? this is GM we are talking about?

 

Should be exactly the same for a much wider number of GM vehicles and years

 

ya after all, this is GM we're talking about

It shouldnt be a hard install, and you'l be very pleased on the comfort after.

 

it's cake to swap...

get the car on jack stands
put the jack under the trans
unbolt the trans mount from the crossmember
unbolt the 4 bolts holding the crossmember
unbolt the 4 bolts holding the mount to the trans

reverse

 

I've changed it in about ~20 minutes or less on the garage floor .

 

Did mine in about 20 minutes also in the transam. Its really simple and all fbodys since 3rd gen use the same mount.

 

ditto.... Did mine when I replaced my Torque Arm and shifter...