Drivetrain Clutch, Torque Converter, Transmission, Driveline, Axles, Rear Ends

Curb Check - bent axle?

Thread Tools
 
Search this Thread
 
Old Nov 24, 2008 | 06:19 PM
  #16  
Z95m6's Avatar
Registered User
 
Joined: Oct 2001
Posts: 6,070
From: newton, kansas, USA
Originally Posted by camarobird92
I'd like to know where you can buy a rear for 200 bucks... I did the same thing on ice. Spun around completely and hit a curb with the driver's side. All the used rears I looked at were above 350. I finally found a used set of axles for 100.
This board or local forums. I sold my old stock 3.42 10 bolt for $150 minus backing plates.
Old Nov 26, 2008 | 11:38 PM
  #17  
mccauls_ss_camaro's Avatar
Registered User
 
Joined: Jan 2008
Posts: 48
same happened to my 96 rs thats y i got it for 800$ i went to a axle shop and they had a used axle for 75$ put it in and filled up the rearend with oil and never had any probs since took me a hour to do the whole job and no specal tools needed
Old Dec 6, 2008 | 12:50 AM
  #18  
dookie454's Avatar
Registered User
 
Joined: Aug 2007
Posts: 573
Put a jack under the rear end so both tires off the gound

Take tires off axle, both sides

Put lug nuts back on to hold rotors

Start it

Put it in drive or 1st gear

Get out and watch axles for any movement or wobble.

Good axles = 0 wobble sideways or up/down.... literally 0.

Put tires back on and watch what's going on.

If still wondering put front tires on back and watch again.

Dont sit under car with it running and in gear.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
teal98
Automotive News / Industry / Future Vehicle Discussion
15
Sep 16, 2002 01:23 PM
danielbmx
Car Audio and Electronics
0
Aug 27, 2002 11:11 PM
johnsocal
Automotive News / Industry / Future Vehicle Discussion
21
Aug 17, 2002 01:06 AM
SilverWS6
Automotive News / Industry / Future Vehicle Discussion
13
Aug 14, 2002 09:29 PM
newby
Automotive News / Industry / Future Vehicle Discussion
10
Jul 27, 2002 11:39 AM




All times are GMT -5. The time now is 06:57 PM.