Okay, I'm replacing the clutch in my 95Z and can't decide on what to go with. I'm in between the Centerforce Dual Friction and a Spec clutch. What do you all recommend and if it's the Spec what stage should I get. The car is just a bolt on car and I don't drive it much at all. So two questions.

1.) Which clutch do you recommend?

2.) Where's the cheapest place to get it?

Thanks in advance

 

I have had good luck with my SPEC Stage 3, but that would be overkill for your setup. If you do go with SPEC, I would recommend the Stage 1 if you have no major mods planned in the distant future or the Stage 2 if you would like to leave some room. The Stage 1 is basically for mildly modified cars, whereas the Stage 2 is good for 500 ft-lbs of torque.

A lot of people complain about SPEC and chatter, but once they break in and you adjust to driving them (people forget these aren't OEM clutches ) the chatter is gone.