Bought a tranny mount from AutoZone... got questions...
Thread Starter
Registered User
Joined: Dec 2003
Posts: 1,457
From: Seattle, Washington
Bought a tranny mount from AutoZone... got questions...
The $25.99 one from Energy Suspension, Polyurthane for GM RWD cars and 2WD cars...
If you need a part number then it is 3.1108G
I'm also running a V6 if it makes any difference...
Will this work?
If you need a part number then it is 3.1108G
I'm also running a V6 if it makes any difference...
Will this work?
Registered User
Joined: May 2000
Posts: 4,738
From: Charleston, SC
Re: Bought a tranny mount from AutoZone... got questions...
Yes and no...
Any poly mounts for v6 f-bodies you need to modify your crossmember. There are 2 bolts that go into the tranny and a single bolt connects the crossmember to the mount.
you need to extend the hole on the mount I have heard a 1/4 in, I had to do mine like 1/2 in. Some use a drill and just grind it down I used a dremel and cutoff wheel tooke me like 30 minutes total to do everything. I have the same one from autozone as you.
Any poly mounts for v6 f-bodies you need to modify your crossmember. There are 2 bolts that go into the tranny and a single bolt connects the crossmember to the mount.
you need to extend the hole on the mount I have heard a 1/4 in, I had to do mine like 1/2 in. Some use a drill and just grind it down I used a dremel and cutoff wheel tooke me like 30 minutes total to do everything. I have the same one from autozone as you.
Thread
Thread Starter
Forum
Replies
Last Post
ZBLKHELLRZR
Drag Racing Technique
4
Aug 18, 2002 07:57 AM
rpm4lalo
Drag Racing Technique
0
Aug 3, 2002 02:35 PM
SavageZ28
Automotive News / Industry / Future Vehicle Discussion
17
Jul 14, 2002 11:04 PM