i just broke my Posi and obviously i need a new one. and i dont have enough to go with a 12 bolt or 9", and i am just thinking i will pull one from a wrecked Fbody.will a rear end from a LS1 work with my car and if so do any of you have one for sale.
Thanks guys

 

yes a ls1 rear will fit make sure its the same channel abs tho

 

do i need to make sure that the tcs is the same to

 

ABS and TCS use the same sensors. An ABS only car (3-channel) will have the rear sensor on top of the diff housing, reading a reluctor wheel on the carrier. An ABS + TCS car (4-channel) will have dual sensors, one on the backing plate at the end of the axle housings, reading small gears on the axles, behind the hubs. If you have TCS, you have to get a rear from a TCS car. If you only have ABS, you need to get the rear from an ABS-only car.

I'll move this to "Drivetrain"..... this question has been asked at least three times in the past few days.

 

Thanks injuneer that makes perfect sense now.