ATF fluid & filter change
Registered User
Joined: May 2006
Posts: 559
From: Pothole, Ohio
Re: ATF fluid & filter change
About 4 and perhaps a little more. 
I left my pan off for 24 hours and somehow ended up draining a couple quarts extra. Perhaps a small drain off via small opening in the TC. But 4 - 5 quarts is what I remember from my other 4L60E.
Adding more than you asked, you might consider disconnecting the output line and pumping out a few more quarts. What I do is collect it, then measure what came out in order to replace the quantity exactly.
I left my pan off for 24 hours and somehow ended up draining a couple quarts extra. Perhaps a small drain off via small opening in the TC. But 4 - 5 quarts is what I remember from my other 4L60E.
Adding more than you asked, you might consider disconnecting the output line and pumping out a few more quarts. What I do is collect it, then measure what came out in order to replace the quantity exactly.
Thread Starter
Registered User
Joined: Jul 2003
Posts: 57
From: Charleston,WV
Re: ATF fluid & filter change
I haven't really looked at the cooler lines but which one is the input to the cooler and which is the output to the trans?
Never Mind- Thank you for your reply. I found which lines are which in a cooler install. Thanks again
Never Mind- Thank you for your reply. I found which lines are which in a cooler install. Thanks again
Last edited by bt95formula; Jul 14, 2006 at 12:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post