South carolina F&Y bodies had there shootout today. We did get rained out Will reschedule DEc 14


New BEST

r/t .622
60' 1.650
330 4.685
1/8 7.190
mph 98.39
1000 9.343
1/4 11.167
mph 122.69

not to bad for a lt1 with stock crank, rods injector. Hope to see 10s soon

 

What are your mods??

Later Jason

 

Its a 30 over LT1. TRW 100 dome pistons, ARP rod bolts, Stock heads home ported. 52mm throotle bodie, 1.60 exaust valves stock intake valves, 3500 stall, 373 gears, cc306 cam, 1.6 roller rockers, 125 shot compucar kit. I think my MPH is a little low for those times. What do you think? It was my first time with slicks on. It launched. It went up. It pulled me back. I got a little scared and I let off it for a split second then punched it. Im impressed with it.

 

Man I think that it is flying that is great for tha mods. How do you like the CC306 with the A4? I am going to run the same setup with Skarodom heads and a CC306.

Later Jason

 

Sounds like alot fun! Nice times.

 

Also looks like your 60's needs to be alittle better. I have done 1.62 with a 2800 vigi. A 1.5 should easily put you in the 10's.

Jason

 

thanks. I love the cc306. And I ran 15 lbs in the tires with that 60 foot. We had a bad accident on the track and after that we got rained out. We are going to rescedule it for dec 14th for more inf on the shootout you can go here http://pub21.ezboard.com/bscfyb
I really think I can get in the 10s. I got a few plans for it. So I hope i will get there.

 

heres a video of that run. After watching it. I think I went though the gears to fast. I just installed a built manual valve body 700r4 and Im not use to it shifting right when you change the gears. Let me know what you think.

http://groups.yahoo.com/group/lowcou...ies/files/kyle's%2011.16.WMV