Anyone know who it is? All I have is a diff and a gear, want to know it before I post my times.

 

Thats a little vague. A high 10 is a big difference from a low 10.

 

I personally know a guy that went mid 10s @ 128ish with a cammed LS1 w/ a 3600 stall and a 175 shot. He pulled a few 1.3x 60's. The 4L60E and the motor went out, but the rear never did.

 

When I still used one I ran very low 11's with no problems. It was a beefed up 10 bolt. No matter how much you beef it up, the tiny ring and pinion will always be the weak link.

 

I myself went 10.50's @131 with a 10 bolt and SLP $99 diff. I did this lots of times. That was with a 1.52 60'. I also know of one other on here Rockafella who has run the same # with the same rear and setup.


JK