I am trying to figure out how to install an aftermarket race type automatic shifter in my 4th gen. Anyone have any pics of a neat way to do this? Any recommendations on shifter brand (for a reverse manual TH400)?

Thanks.

Rich Krause

Here is a pic of my Hurst pistol grip quarter stick. I had a 6-speed before so I just made the shifter boot fit over it.

http://www.hustonstreetracing.com/je...s/shifter2.JPG

Thank you both very much!

Anyone else?

Rich Krause

Check both links in my signature,i have a B&M Pro Stick in the stock A4 console.
The second link is without some of the interior.

Some pics of my shifter are on this site: www.rhodescustomauto.com , click on the red fourth gen on the main page and it will give you a bunch of pics.
Matt

Nice car!

Thanks to you and "RacinLT1".

Rich Krause

Yeah very nice car.

If you are still looking for some pics.

I have a Turbo Action Cheetah Shifter in my car.
Many pics of the install on my site.

www.z28racer.com

look under the trans section.

Ken

Mine, if you haven't seen it already

http://turbocharged.net/twinturbo/shifter/

Thanks to you all for the links. Very helpful!

Rich Krause

B&M Pro-Ratchet, in stock M6 console.....

Install


Photo 1


Photo 2

The boot has "snaps" on it to hold it closed, and to allow it to be pulled up and off with the surround ring, to make the gear position indicator visible for racing.

Thanks!

Rich Krause

Theres a couple pics of mine in my . Its a B&M Hammer shifter . Been using it for about a year now with a manual VB and I love it !!! I used a stock 6-speed console and boot to cover eveything all up

B&M Quicksilver Shifter