CamaroZ28.Com Message Board

Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

Will tuning fix my 3rd gear lockup issue?

Thread Tools
 
Search this Thread
 
Old Sep 30, 2007 | 10:13 AM
Share
  #1  
pyro719's Avatar
pyro719
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 502
From: colorado springs
Will tuning fix my 3rd gear lockup issue?
Ok So racing down the quarter mile about halfway through 3rd gear the transmission goes into lockup, Would tuning fix this? I am still on the stock tune right now.
Reply
Old Sep 30, 2007 | 12:36 PM
Share
  #2  
aifilaw's Avatar
aifilaw
Registered User
 
Joined: Aug 2006
Posts: 199
From: Longview, TX
yes, adjusting your TCC converter lockup tables will set the lockup for wherever you want it to be at.
Reply
Old Sep 30, 2007 | 12:51 PM
Share
  #3  
pyro719's Avatar
pyro719
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 502
From: colorado springs
Can madz28 do this in his mailorder tune?
Reply
Old Sep 30, 2007 | 02:04 PM
Share
  #4  
VinceTrifecta's Avatar
VinceTrifecta
Registered User
 
Joined: Oct 2006
Posts: 477
From: Seattle area
There is a "forced gear lock TCC" value that can be adjusted. A quick look at a couple different LT1 calibrations shows this happens at 100 MPH. This could be disabled by changing it to 255.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Project Frankenbird - spring 2015 - D1SC 383 Lt4, advice welcome! LONG
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Trans issue
PCLZ28
Drivetrain
7
Dec 24, 2015 05:19 PM
Fuel Pump, Injectors, Opti, or all of the Above?
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM
6.6 @ 105.11- 1/8mile, what does that translate into the full 1/4
taner
Drag Racing Technique
7
Aug 14, 2002 10:10 PM
HAL QA1 install
MislMan
Drag Racing Technique
1
Jul 19, 2002 11:41 AM
Back to Subforum
Computer Diagnostics and Tuning
View Next Unread
Are '96 and '97 computers interchangable?




Advanced Search

All times are GMT -5. The time now is 06:45 PM.