I saw on shoebox's site that a OBD 1 scan tool can be made to work on the 95 connector. Just wondering if there's any walkthrough's or write ups about how to do it, it looks easy, just want to use the correct wires, etc.

Thanks,
Keith

 

AKM sells cables and tells you how to build them

http://www.akmcables.com/techinfo.htm

For the work involved in building them and the risk of screwing something up vs their cost.... I just bought one from him

 

Sorry for putting this in the wrong forum.

The picture I saw just had 2 wires from the scan tool going to the diagnostic connecot under the knee bolster.

 

That is all there is to it. I think I might have used pieces of a heavy duty paper clip and soldered them onto the end of the wires (something that would fit snugly in the DLC).

A real adapter would be nice, though.

 

Somewhere on Autoxray's site is pics and instructions on the same thing.

 

Mastach.com

Universal connector works on OBD 1 & 2