I finally got a PCMCIA serial card to work with my Dell laptop however it is listed as Com port 5 but LT1 software only list com ports 1-4. How do I go about solving this problem?

 

See if you can change the port setting for the card in the device manager.
Start, settings, control panel, system,hardware, device manager.
Find the PCMCIA card and/or com port, and right click on it, and go to properties, and maybe advanced or something.
You should find a box where you can change the com setting for the card.

 

Ya after you get to properties click on port settings and you can change the com designation.

 

I finally got it to work...it turned out to be a misprint in the installation instructions. Thanks