Hello I have a scanner I bought from murray's for odb II. The scanner worked good for a couple months than when I would try to connect it to the pcm it would just power off. Thought it was the scanner so I had it replaced, still does the same thing. Do you think my pcm is messed up or the programming port? Thanks Jason




1997 Camaro SS #1039 M6
LE1 2.00-1.56 valves, Matched Intake, Holly 58mm, CC306, 30lb injectors, Pacesetter Long tubes, TTL exhaust, No Emissions, Mad Z28 Tune, 4:10’s, Level II Suspension, Sphon LCA'S, Spohn Panhard, Hotchkis swaybars, BFG KDW’s.

 

Dunno, but first thing I'd check it to be sure you have power to the DLC port, maybe a fuse is blown?

 

Yep, check the cigarette lighter fuse. It feeds the DLC. Some scanners need this power.

 

Thanks guys. That was it, must of popped it with my Ipod. I was getting scared thinking it was something serious because I just had the whole car apart last winter





1997 Camaro SS #1039 M6
LE1 2.00-1.56 valves, Matched Intake, Holly 58mm, CC306, 30lb injectors, Pacesetter Long tubes, TTL exhaust, No Emissions, Mad Z28 Tune, 4:10’s, Level II Suspension, Sphon LCA'S, Spohn Panhard, Hotchkis bars, BFG KDW’s.