OBD1/OBD2 Question
Thread Starter
Registered User
Joined: Jan 2001
Posts: 261
From: Ft. Myers, Florida
OBD1/OBD2 Question
I had a problem with a corupted file during programming and messed up my chip on my OBD1, (94 Z28 A4). Can I use a OBD2 computer in my car while I send it out to get it fixed, If so, what changes would I have to make. Does anyone know when software will be out to program the OBD2?
Thanks
Brian
Thanks
Brian
Registered User
Joined: Jul 2001
Posts: 4,577
From: DeKalb, IL
No, don't use the OBD2. The tranny control is different in the '94 than the 95+.
Plus, the knock sensor isn't the same and your car will most likely run like crap due to knock being retarded to maximum.
If you don't want to wait, I can send you a computer ahead of time (requires a core charge, but it is fully refundable when I get your pcm back).... I fix them as well and also socket them.
Plus, the knock sensor isn't the same and your car will most likely run like crap due to knock being retarded to maximum.
If you don't want to wait, I can send you a computer ahead of time (requires a core charge, but it is fully refundable when I get your pcm back).... I fix them as well and also socket them.
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
Mar 13, 2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
Mar 7, 2015 09:44 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
2
Dec 19, 2014 08:48 PM
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM
