Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

Need someone to help with datalogging

Thread Tools
 
Search this Thread
 
Old Sep 14, 2007 | 02:56 AM
  #1  
mrmint69's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 2,731
From: Post Falls, Idaho
Need someone to help with datalogging

I finally got some datalogging done. Now can someone tell me how to get it on here so someone can see it all? I got some reading that i am interested if they mean anything. My spark advance cruising a 40 is 40-42. If i go wot it reads 35-37 the whole time. The second a let the gas off it goes to 45 for 2 frames and then to the teens during deceleration. The 02's read .900+ the entire time the car is going WOT and .004 to .020 while deceleration.
Old Sep 14, 2007 | 10:34 PM
  #2  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,104
From: Hell was full so they sent me to NJ
You have to load the file to a web FTP site, and post the link. There are some good ones and some bad ones. What are you data logging with? If its DataMaster, it is helpful to upload both the DataMaster .uni file so people can open it with DataMaster, and to export the file from DataMaster as a .csv file, so people can also open it with Excel.

None of the data you posted appears unusual.
Old Sep 16, 2007 | 12:08 PM
  #3  
mrmint69's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 2,731
From: Post Falls, Idaho
Ok i think this is it. Thanks in advance.

http://files-upload.com/files/506494/jjjjjj.csv

Last edited by mrmint69; Sep 16, 2007 at 12:09 PM. Reason: messed up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fastbird93
Parts For Sale
3
May 22, 2005 02:14 AM
BlackLT1_TX
LT1 Based Engine Tech
2
Mar 26, 2005 12:04 AM
BlackLT1_TX
LT1 Based Engine Tech
5
Mar 3, 2005 11:20 AM
BlackLT1_TX
LT1 Based Engine Tech
11
Feb 18, 2005 01:29 PM
BlackLT1_TX
Computer Diagnostics and Tuning
3
Feb 18, 2005 12:19 PM




All times are GMT -5. The time now is 03:00 PM.