Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

Need info on tuning trans tables

Old Apr 20, 2007 | 08:59 PM
  #1  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
Need info on tuning trans tables

I have a 94 Camaro A4 with 3600 stall and 4.10's . I adjusted shift times, shift points, and RPM thersholds but the 2-3 shift still wants to hit the rev limiter. What am I doing wrong or is the tranny on its way out?

Last edited by jakesz28; Apr 20, 2007 at 09:05 PM.
Old Apr 20, 2007 | 09:02 PM
  #2  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
Shift time

0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250
0.250 0.250 0.250


Shift pionts
12 20 30 7 15 25
14 27 40 9 22 35
14 27 40 9 22 35
16 29 45 11 24 40
16 29 45 11 24 40
18 33 46 13 28 41
20 37 60 15 32 55
22 41 70 17 36 65
24 45 80 19 40 75
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82
24 47 88 20 41 82


RPM thershold
5600
5600
5600

Last edited by jakesz28; Apr 21, 2007 at 07:11 AM.
Old Apr 20, 2007 | 09:04 PM
  #3  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
The 2-3 shift is at about 60+ mph even thu it was set at 47 trying to stay away from rev limiter
Old Apr 20, 2007 | 10:39 PM
  #4  
LiT1_up's Avatar
Registered User
 
Joined: Nov 2003
Posts: 220
From: Topeka
try lowering your shift rpm point along with your mph and see if that helps.
Old Apr 21, 2007 | 07:40 AM
  #5  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
What exactly is the upshift speed threshold in the consants and how does it affect shifts?
What is the downshift speed threshold?
Old Apr 21, 2007 | 07:41 AM
  #6  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
Will I'm getting ready to go to the track and I would like to get this figured out before I go.
Old Apr 21, 2007 | 02:10 PM
  #7  
Airbornec507's Avatar
Registered User
 
Joined: Dec 2005
Posts: 372
Hot kickdown mode shift speed threshold needs to look like this:

1-2: 1
2-3: 58
3-4: 98
2-1: 0
3-2: 57
4-3: 97

Hot RPM kickdown points:

(Set to the desired shift points for the respective gears as you like. Here's an example for what worked best for me on stock motor)
5800
5700
5700

The gear ratio in the tools/speed calibration section must be right on or you will continually hit off the rev limiter. Set the rev limiter in the constants table to around 6300. Also set the VSS disable in the constants to 3800 or even 4000 if you continue to have problems.
Old Apr 21, 2007 | 04:53 PM
  #8  
jakesz28's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 393
From: Camanche IA
I had the vss disable at 4000, then I tried 4500.

I set the rpm threshold to
5500
5100
5500

I had to use 5100 for the 2-3 shift in order to make it shift at about 5600.

Just got back from the track and ran a 12.10 at 110 mph.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
DirtyDaveW
Forced Induction
13
Dec 1, 2016 05:37 PM
PCLZ28
Drivetrain
7
Dec 24, 2015 05:19 PM
rockync7
Cars For Sale
0
Jan 1, 2015 05:10 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:17 AM.