Malf 48: maf system fail ??
Thread Starter
Registered User
Joined: Jun 2001
Posts: 82
From: Wichita, Ks
Malf 48: maf system fail ??
I have a 94 trans am and Datamaster is showing a malf 48: maf system fail.
I looked for an eng sensor fuse "found from an ealier post" and I dont have one under the hood nor on the drivers side of the dash "the one you get to by opening the door". Are there any other fuse boxes on my car or do the 94's not have a fuse for the maf. I will test the pink wire tomorrow and see if I'm getting +12 volts on it "I take it thats with the ignition in the on position".
I looked for an eng sensor fuse "found from an ealier post" and I dont have one under the hood nor on the drivers side of the dash "the one you get to by opening the door". Are there any other fuse boxes on my car or do the 94's not have a fuse for the maf. I will test the pink wire tomorrow and see if I'm getting +12 volts on it "I take it thats with the ignition in the on position".
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
May 21, 2015 01:04 PM
squarehead
General 1967-2002 F-Body Tech
7
Jan 15, 2015 07:02 PM