Looking for PCM file.
Thread Starter
Registered User
Joined: Apr 2003
Posts: 18
From: Kansas City, MO
Looking for PCM file.
I have a stock 94' Z28 A4 w/ 108K. I'm looking for a PCM file that will firm up the shifting a bit and squeeze any extra out of the stocker.
I recently updated the plugs, wires, optiCRAP, timing set and water pump. I have an EGR problem (code 32) so I'm looking to delete that as well.
I've been playing with the freeware scanning software and I'm ready to drop a new program in the PCM.
The rub is at 72K I put some HARD HARD tires on . They still have 20K of life left in them. So all I want to do bump things up a hair. Too much more power and I'll be spinning all over the place.
When the tires are shot, out comes the LT1 and A4 for mods.
TIA
Jon
I recently updated the plugs, wires, optiCRAP, timing set and water pump. I have an EGR problem (code 32) so I'm looking to delete that as well.
I've been playing with the freeware scanning software and I'm ready to drop a new program in the PCM.
The rub is at 72K I put some HARD HARD tires on . They still have 20K of life left in them. So all I want to do bump things up a hair. Too much more power and I'll be spinning all over the place.
When the tires are shot, out comes the LT1 and A4 for mods.
TIA
Jon
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
Mar 3, 2023 08:34 PM