Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

knock retard

Old Oct 6, 2006 | 03:07 PM
  #1  
kline454's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 420
knock retard

knock retard

--------------------------------------------------------------------------------

My camaro is pulling 1degree of time at idle and 2 degrees at wot, I replaced my knock sensor same thing and my knock module with no diff made, i also checked my wire to my knock sensor it has the 5v with wire off like it should and the sensor has 3800ohms of resistance and spec is 3500 to 4500 so thats good. so i put a resistor 3800ohm from the wire to ground. and the car still pulls 1 degree at idle and 2 degrees at wot, any know why this is?
__________________
1995 Z28 Long tube headers hooker off road Y,cat back,cc503 918 spring,1.6rr 58mm TB MSD 6A,2400stall 3.73,1.99 60ft 13.12 @105.37
Old Oct 6, 2006 | 05:05 PM
  #2  
kline454's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 420
Re: knock retard

Anyone?
Old Oct 6, 2006 | 07:43 PM
  #3  
kline454's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 420
Re: knock retard

Replaced PCM no diff made.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
94Maroz28
LT1 Based Engine Tech
30
Oct 27, 2015 04:38 PM
football4life
Cars For Sale
2
Oct 4, 2015 07:48 AM
SergheiS
General 1967-2002 F-Body Tech
5
Sep 29, 2015 08:56 PM
SEOJustin
Computer Diagnostics and Tuning
5
Sep 24, 2015 04:39 PM
asilomar244
LT1 Based Engine Tech
17
Jul 12, 2015 05:53 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:32 AM.