Anyone use this combination? I just got it today and wasn't some of the codes are that the HPP can scan. I was wondering what are important things to scan... and what values should I be concerned about?!

------------------
97Z-28, 2.73gears, LPE CAIK, Magnecore 8.5mm wires, Bosch Platinum +4, Eibach Pro springs, SLP Loudmouth, Kenny Brown SFC & tower strut brace. (Motive 3.73 gears and TA girdle already ordered)
(14.6@98MPH 1/4 mile bone stock run)

 

Look at O2 sensor readings at WOT (with someones help). Also note timing advance. Those two are pretty critical. 36-38 degrees timing, and mid-.8 milivolts are pretty good.

Scott


------------------
1997 Z28 MM6 Moroso CAI, Flomaster American Thunder, Taylor, Air Foil, SLP Headers, Crane Ignition, MAF, HPPIII, 4:10's, Summit Girdle, Drilled Rotors,
13.75@ 100.98 MPH
2.055 60'

New Times w 4:10's

14.3 @ 99.46 2.2 60'
Angry, but dealing with it....

 

Read this... it should answer most of your questions regarding scanners....

http://members.aol.com/InjuneerZZ/ScanMast.htm



------------------
Fred
94 Formula A3+1: 381/TH400+OD/N2O

Advanced Tech Posting Guidelines
Detailed Mod's List
11.513@115.59 on motor; 11.162@127.67, 1.643 60' on a 125-shot. Going with a 275-shot this year