LPW Rearend Support Cover for 8.2 or 8.5 Rearend and Cragar Superlites for sale!
08-21-2002, 01:06 PM
#1
Registered User
Thread Starter
Join Date: Jun 1999
Location: Pensacola Florida
Posts: 609
LPW Rearend Support Cover for 8.2 or 8.5 Rearend and Cragar Superlites for sale!
LPW Rearend Support Cover for 8.2 or 8.5 Rearend. The place I bought it from wont take it back and it's to a project that I am not doing anymore so I dont need it. Brand new. $135 shipped.
Cragar Superlites 15x10's with 4.5 backspacing I think. There is kind of big spot in the clear coat on one them. They need to be polished up. There is a big weight on the back of one of them, I dont know if it's bent, they were on my 80 Z28 and it hasnt ran in two years. They fit under an 80 Z28. $100 plus shipping as is.
I know this belongs in the For Sale Section but I already have them there and figured the people that have the cars this stuff fits would see them here.
------------------
1980 Camaro Z28 Sikkens 3 Stage Blue and Purple
1994 Camaro Z28 Teal M6
Ported Heads, LT4 Hot Cam and Springs, 1.6 RR's, Mac Headers and Offroad Y Pipe, Flowmaster Catback, Resonators, Flowtech Cutout, NX 150 Horsepower Shot of Nitrous, NX Bottle Heater, NX Remote Bottle Opener, NOS Purge, KB DD SFCs, BMR STB, Hypertech 160 Thermostat, Redline Water Wetter and Synthetic Diff. Fluid, McLeod Dual Performance Clutch, K&N FIPK, LT4 KM, 1LE Bellow, Holley 58mm Throttle Body, TB Coolant Bypass, Metco Valve Cover Breather, LPW Rearend Support Cover, Strange 3.73s, Eaton Posi, TA Stud Kit, Lakewood LCAs and Adjustable Panhard Rod, LS1 Driveshaft, March Underdrive Pullies, MSD 6AL, MSD Window Switch, MSD Blaster Coil, NGK TR6's, Mobil 1 Synthetic, Pro 5.0 Shifter, Intrax Lowering Springs, BFGoodRich Comp TAs 255/50/16, Nitto Drag Radials 245/50/16, AVS Blackouts on the back.
339 RWHP Corrected with two broke rings
465 RWHP Corrected on the nitrous with the clutch slipping bad and two broke rings
www.geocities.com/speeds8erm1
Cragar Superlites 15x10's with 4.5 backspacing I think. There is kind of big spot in the clear coat on one them. They need to be polished up. There is a big weight on the back of one of them, I dont know if it's bent, they were on my 80 Z28 and it hasnt ran in two years. They fit under an 80 Z28. $100 plus shipping as is.
I know this belongs in the For Sale Section but I already have them there and figured the people that have the cars this stuff fits would see them here.
------------------
1980 Camaro Z28 Sikkens 3 Stage Blue and Purple
1994 Camaro Z28 Teal M6
Ported Heads, LT4 Hot Cam and Springs, 1.6 RR's, Mac Headers and Offroad Y Pipe, Flowmaster Catback, Resonators, Flowtech Cutout, NX 150 Horsepower Shot of Nitrous, NX Bottle Heater, NX Remote Bottle Opener, NOS Purge, KB DD SFCs, BMR STB, Hypertech 160 Thermostat, Redline Water Wetter and Synthetic Diff. Fluid, McLeod Dual Performance Clutch, K&N FIPK, LT4 KM, 1LE Bellow, Holley 58mm Throttle Body, TB Coolant Bypass, Metco Valve Cover Breather, LPW Rearend Support Cover, Strange 3.73s, Eaton Posi, TA Stud Kit, Lakewood LCAs and Adjustable Panhard Rod, LS1 Driveshaft, March Underdrive Pullies, MSD 6AL, MSD Window Switch, MSD Blaster Coil, NGK TR6's, Mobil 1 Synthetic, Pro 5.0 Shifter, Intrax Lowering Springs, BFGoodRich Comp TAs 255/50/16, Nitto Drag Radials 245/50/16, AVS Blackouts on the back.
339 RWHP Corrected with two broke rings
465 RWHP Corrected on the nitrous with the clutch slipping bad and two broke rings
www.geocities.com/speeds8erm1
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM