ShawnMacAnanny

Yeah im selling my Firebird Formula. 76k miles. The transmission is going out on it. It wont hold above 4,000 rpm in 1st or 2nd gear. In 3rd gear i pulled all the way to 140 or so beforei felt 3rd gear slip. I still drive it to work everyday and it's been doing it for a few weeks. Here is all the info

Holley 255LPH fuel pump
Modified SLP Ram Air box
3 1/2" cowl hood
Unorthodox Underdrive pulley
Jet Hot Ceramic Coated Long Tube headers (1 3/4" primaries, 3" collector)
2 1/2" true duals -> X pipe -> GMMG (Sweet Thunder) mufflers -> side exits
8mm Taylor over the valve cover wire kit
NGK TR55 plugs gapped @ .050"
Throttle body coolant bipass
Throttle body air foil
Hypertech 160 degree thermostat
Descreened and ported MAF
Computer tune from Bryan Herter (PCMforless.com)
Gunmetal Corvette Zr1 rims (17x9.5 front 17x11 rear)
315 Nitto 555r Drag radials (rear) 275 Continetal Extreme (front)
Removed front crash bar and bumper support
Removed all rear interior pannels in the back
Removed all radiator duct work
Cut open front bumper to be functional
3.73 rear end gears
Weighs 3270lbs.

http://home.earthlink.net/~firebirdformula/

The things wrong with it. It seems to be running rich. I think it may be the fuel pressure regulator becuase of the 255lph pump i have. Also the bumper doesnt line up with the hood. I investigated this further and have come to find that the headlight bar is cracked which is causing the bumper to sag. It will need to be plastic welded or have another one put in. I would just get one off of ebay for $80 or so.

This car ran consistent 12.9s on a G-tech with the 2.73s. I may end up keeping the wheels in which case i will work out a deal on the price. PM me with any questions. I did fix the front bumper. Here is a current pic of the car. I dont get home from work during daylight hours so thats why i dont have any pics of it during the day. You are welcome to come look at it.You are welcome to come look at it. I am located in Felton, Delaware 19943. You can email me @ ShawnMacAnanny@earthlink.net or IM me on AIM or Yahoo @ ShawnMacAnanny

http://home.earthlink.net/~firebirdf.../newbumper.jpg

RocCityZman

Please shoot me a PM if you decide to part it out. Thanks!

Matt

ShawnMacAnanny

Here are some pictures i took today

http://home.earthlink.net/~1995formula/

Here are some pictures of while i was installing the headers and plug wires

http://home.earthlink.net/~xmx/id10.html