I've got a viper alarm on my 96' and I did install it myself, which I am proud of. I've had it installed for about a year now, but I’ve grown tired of replacing the bulbs in the running lights, they don't blow a lot, but enough to be an annoyance from when the alarm arms and disarms. Anyway, the unit is tapped in completely at the BCM, and what I wanted to know, was if there is a wire that controlled the hazard lights near the BCM, and if so where, and what color. The turn signal bulbs are made to flash, and I hope that they won't blow nearly as much. And plus I haven't had to replace any of the dash lights which also flash yet, but those are really a pain to get to.


Just for curiosity sake, what blinks on the factory alarm, the parking lights like mine, or just the turn signals?

Thanks y'all