I was going to attempt to ty this.

And was wundering if i need anything more then just the 30A auto relay i just got Considering this should work for it right?

 

yep...should work great as a starter kill....I've used rat shack relays before and they've lasted for quite a while

 

alright so i dont need connectors or anything?

 

Do you know how to solder? If you do, you'll just need some extra speaker wire laying around. If you don't have a clue on how to solder, just use crimp-on connectors to attach the wires to the relay.

 

What kind of Crimp-on connectors do i need to attach them to the relay? can someone post a picture or something?

 

you will need the female quick disconect ends (spade) to go directly to the relay, or if u buy a relay with a mount and harness just some simple butt connectors. Some of the 3M scotchlocks may be helpfull for tapping signal/power from the window switch and a ring terminal to make a neat ground connection.

 

Something like the blue connector in the lower left of this picture...

http://www.bfranker.badz28.com/fbody/alarm01a.JPG

Also, if you aren't overly familiar with that relay, read up about it here and you'll get some ideas.

http://www.bfranker.badz28.com/fbody/alarm.htm