I need the paperwork for a Aerospace Components 4-vane Pump for a dry sump system. I baught the kit used but have no information on it.

 

You might start here:

http://www.aerospacecomponents.com/vacp.htm#vp

This probably isn't the right place to post this type of question.

Try this:

http://web.camaross.com/forums/showt...threadid=47092

 

http://www.maxracesoftware.com/BBC_Vac_Pump_4.jpg

i'd always purchase the 4-vane pump , then you can tailor vacuum amount easier to what you want

sometimes 3-vane is not enough

the larger CID of engine
the higher the compression ratio
the worse the rod ratio
the worse the hone job/ring seal

the more the vauum pump will gain Torque and HorsePower