Roller Cam Help
#4
Re: Roller Cam Help
you also need the roller lifter hold down bracket to keep them from spinng. flat tappet lifters are designed to rotate while in ioeration but the rollers are not, they need to be held in place so they dont go sideways on the cam lobes.
the bracket is usually bolted into the valley under the intake manifold. youd have to modify that to gget it to work.
the bracket is usually bolted into the valley under the intake manifold. youd have to modify that to gget it to work.
#5
Re: Roller Cam Help
Originally Posted by Black305RS
you also need the roller lifter hold down bracket to keep them from spinng. flat tappet lifters are designed to rotate while in ioeration but the rollers are not, they need to be held in place so they dont go sideways on the cam lobes.
the bracket is usually bolted into the valley under the intake manifold. youd have to modify that to gget it to work.
the bracket is usually bolted into the valley under the intake manifold. youd have to modify that to gget it to work.
Thread
Thread Starter
Forum
Replies
Last Post