is .045 to much of a gap on my Rapidfires????
08-18-2002, 11:25 PM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: Cedar Falls, Iowa, USA
Posts: 14
is .045 to much of a gap on my Rapidfires????
Hi guys,
I am going to be putting plugs and wires on my 1988 GTA with the 305 TPI. Is gapping them at .045 to much? Its fairly stock except for a TB bypass,Hypertech cap and rotor and coil and air foil and a catback and a CAI. Thanks for your help.
I am going to be putting plugs and wires on my 1988 GTA with the 305 TPI. Is gapping them at .045 to much? Its fairly stock except for a TB bypass,Hypertech cap and rotor and coil and air foil and a catback and a CAI. Thanks for your help.
08-19-2002, 07:58 AM
#2
Registered User
Join Date: Jul 2001
Location: Illinois, USA
Posts: 69
Yes, 0.045" is correct. Delco knows the factory spec is .035" but Rapidfires are made to run with a larger gap. I spoke with a tech there and he told me NOT to change the gap. I haven't had any probs and I just have a stock ignition system.
Thread
Thread Starter
Forum
Replies
Last Post
Kodiak2727
3rd Gen / L98 Engine Tech
2
08-07-2002 04:15 PM