I have been asked this question maybe 20 times. Working on the WD40 car, I had some time to be able to check some of the oddities such as this. We had the front cambers set at -1.0 degrees camber and the rear SS wheels and tires fit on the fronts. There was approximately a pencil width clearance between the strut and the tire. But that is OK. The cambers I set the front end is moderately aggressive, and is the max I would put it at for clearance issues.


Mike
dms

 

Thanks for the info!

 

Nice to know that the offsets are compatible. Does the tire stick out at all?

 

No

mike
dms