If so, please post pics & also how did you mount it? Was it easy? What was required?

 

http://chevy94c.cz28.com/photo.html

------------------
Vigilante 3200 Stall Converter, LS1 Driveshaft, B&M Supercooler 19,000 GVW, Moroso Cold Air Induction, MAF Translator Plus, LT4 KM, Fan Switch, Jet IAT, Hypertech Power Stat, MSD Coil, NGK TR6 Plugs, Jacobs Wires, Russell Wire Dividers, Scanmaster, 3.23 Gears, SLP Headers w/PBM Coating, Borla Adj Catback, DMH E-Borla, Air Foil, Metco Breather, LT4 Starter, NX System, Nitto drag radials, Hal rear shocks, BMR STB PHR LCA

 

put mine there last night. I've got the NX kit and it bolted right in with no probs at all. I put the staps on it scribed the holes, drilled em. I need to cut off the end of the screws in the fenderwell and cap em off. I used the taller mount at the bottom. Pretty easy really. Sorry, no pics.
If you got the NX kit its got everything ya need, good luck.

------------------
96Z M6, 12 bolt Moser(3.73),Star stage 2 kevlar, SLP CAI,!maf,LT4 NM,Flowmaster,Hurst roll control,BFG DR's,Pro 5.0,BMR DS loop...
13.52-103.8 mph
60ft. 1.99

 

I have mine in there as well, I got two peices of 2"X10" and cut them to fill the bottom of the compartment and give me a flat surface to mount the bottle, there is a pic below if you would like more information or more pics feel free to e-mail me

http://groups.msn.com/GMsFbody/afewp...to&PhotoID=129

------------------
Johnny Dahia
30th Anniversary Z28

• My Performance Pages
• Race Results
• GARAGE SALE
• British Columbia Team F-Body

 

Here's mine. Just bolted her in.

http://www.geocities.com/cjwalker2/99Z/pics/bottle.jpg


------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps

 

Sent you some mail
Skip

------------------
Michigan Skip's Flamed 95
95Z28, K&N TPIS 150hp NOS & 27mpg!
MSD 6AL, Window switch,Ford SVO 24# injectors,
2.73's (3.42's to come) Edelbrock headers, Flowmaster exhaust
BMR SFC,LCA,STB