|
||
The best way to get the hub back on...sleeperZragtop 03-16-2003, 10:30 PM ...help, I've managed to get it in a bit but it still has a way togo...so far I've wraped a hammer with a cloth and tried to bang it in but she stopped going in...I think I need to bash it in the middle...any suggestions? ...thanks zturbo 03-16-2003, 10:55 PM Do not use a Hammer to get it back on!! Use a bolt that threads into the center and push/pull it on, using a threaded piece so you can thread it in, then use the outside area to pull it in farther without damaging threads, or the dampner. The threaded section might get damaged but that can be replaced easily. I would not beat it on with a hammer though. Steven sleeperZragtop 03-16-2003, 10:59 PM Thanks Steven, I watched Craig beat the crap out of his so i figured what the hell:confused: ...thanks again..I'll try it; Mike zturbo 03-16-2003, 11:00 PM Thanks Steven, I watched Craig beat the crap out of his DOHHHHHHHHHHHHHHHHHHH bunker 03-16-2003, 11:29 PM Craig & cars don't mix :) Yeah don't forget to align the hub :) 97TA-WS6-Con 03-17-2003, 12:22 AM Actually we took a large piece of 2 by 6 and hit it with a 28 lb hammer sqaure in the middle. It worked. *shrug* zturbo 03-17-2003, 12:34 AM Shaun for next time don't wack with a hammer and board. The installers are cheap at lordco and mopac and such... IT is like this would you pull the crank out and wack it outside the motor?? Not flaming just giving another view.. Steven bunker 03-17-2003, 12:41 AM Yep, those bearings don't like to be hit 97TA-WS6-Con 03-17-2003, 01:30 AM Hi Steve Actually I did not do it. I was just asked to find a big hammer. bunker 03-17-2003, 01:56 AM Yeah who would :rolleyes: Draco 03-17-2003, 02:48 AM Originally posted by zturbo Shaun for next time don't wack with a hammer and board. The installers are cheap at lordco and mopac and such... IT is like this would you pull the crank out and wack it outside the motor?? Not flaming just giving another view.. Steven Yeah... none of us who were there yesterday knew any better.... next time :) sideways_Into_3rd 03-17-2003, 03:49 AM hey man dont look at me like that .. I PUT THE BOLT IN THERE .. and told u to crank it down till the hub is almost in .. take it out . put spacer in .. and crank it again but oh wait .. that bolt wouldnt even work with ur hud :D lol zturbo 03-17-2003, 11:23 AM but oh wait .. that bolt wouldnt even work with ur hud Oh dang he installed heads up display :p I thought we were talking about hubs here Pam :p | ||