Supporting Vendor Index    -    Advertising Information
PDA

LCA relocation

Black6spdZ
03-13-2007, 10:32 PM
i am looking at getting a set from umi, is there that much of an advantage to the weld in over the bolt on?

Scott
MyShibbyZ28
03-13-2007, 10:42 PM
The bolt in are just as strong as the weld in.
myslowcamaro
03-13-2007, 10:46 PM
price wise the bolt ons are a bit more but you save that by not paying a welder to put them on.
MTL_Z28
03-14-2007, 03:50 AM
Note that if you're going to invest in a aftermarket rear in the near future you will need to go with weld-in relo brackets though.
2000GTP
03-14-2007, 04:18 PM
The weld-in style are going to over more in terms of strength. Some people buy the bolt-ins and have them welded as well in a later time.
joe-96z1le
03-14-2007, 05:28 PM
I've got bolt-in brackets with my Strange 12 bolt. No need to go with weld on type.
MTL_Z28
03-18-2007, 09:10 PM
I've got bolt-in brackets with my Strange 12 bolt. No need to go with weld on type.

Must just be for the BMR brackets then.
Injuneer
03-19-2007, 12:48 AM
No... its for Moser rears. The Strange 12-bolt is totally identical to the factory rear with regard to the axle tubes and brackets.
Airbornec507
07-24-2007, 08:16 PM
Maybee an old thread but are you saying that the J&M bolt in LCA brackets won't fit the Moser 12 bolt? I ask because I just purchased the Moser and have the bolt in LCA relo bracket waiting to be installed.
NOSCaMaRo
08-14-2007, 10:33 PM
Maybee an old thread but are you saying that the J&M bolt in LCA brackets won't fit the Moser 12 bolt? I ask because I just purchased the Moser and have the bolt in LCA relo bracket waiting to be installed.

No they won't, you need to go with a set like UMI makes just for Moser rear ends