dyno for LS1 hotcam

Hello,

I'm new here and recently picked up a 2000 TA with all the bolt ons and the LS1 hotcam. The car is a M6 car and has dyno'd at 365hp/370tq on a dynojet. Very flat band, TQ over 300ft/lb from 2500 to nearly 6300, peaking at 370ft/lb around 4000. HP peaks at 5500 and pulls flat across to 6500.

Car came with LS1edit which I'm trying to figure out at well. Basically, are the number above pretty normal for a full exhuast (MAC midlength) and intake mods and LS6 intake.

Thanks and happy to be here.

i'd say they were quite good numbers. specially the torque.

keep playing with the edit program and see if you can tweek it more

Mine made 381.8 rwhp at 5959, and 373.3 rwtq at 5000. It is above 350 rwtq from 3000-5700, and makes 300 rwtq by 2300.

http://memimage.cardomain.net/member_images/1/web/697000-697999/697397_1_full.jpg