V6 Tech 1967-2002 V6 Engine Related

Need the firing order and plug pattern for my 96 3.8 rs

Thread Tools
 
Search this Thread
 
Old Mar 14, 2004 | 07:03 AM
  #1  
bad84z's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 193
From: Fort Meade Md
Need the firing order and plug pattern for my 96 3.8 rs

Replaced the plugs and wires last night, and now I have a bad stumble. I did a 1 for 1 swap, but Just want to make sure that by some way I didn't mix anything up. ANyone tell me what number on the coil pack goes to which plug. THanks in advance. Jason
Old Mar 15, 2004 | 08:56 AM
  #2  
stangkilla1's Avatar
Registered User
 
Joined: Jul 2002
Posts: 497
From: Atlanta, Ga
Go to Autozone or Advance auto and ask them to print you out a diagram and wiring order. It's free
Old Mar 15, 2004 | 09:25 AM
  #3  
bad84z's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 193
From: Fort Meade Md
Originally posted by stangkilla1
Go to Autozone or Advance auto and ask them to print you out a diagram and wiring order. It's free
I went to autozone and had them do the diagnostic test on the car. The number 4 cylinder was misfiring. Figured I cracked the plug, so I replaced it, turns out that wasn't it, it was my #4 plug wire. A brand new set of taylor spiro pros and one of them were bad. I am so mad.
Old Mar 17, 2004 | 01:26 PM
  #4  
HBHRacing's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,109
From: Statesville NC
looking at motor..

cyl.

6 - - - - 5

4 - - - - 3

3 - - - - 1

coils..

1
4

5
2

3
6


fireing order 1-6-5-4-3-2
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CaptainObviousI
Fuel and Ignition
29
Apr 29, 2021 10:35 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
daves91z28
3rd Gen / L98 Engine Tech
3
May 12, 2016 06:19 AM
Darth_tsunami
V6 Tech
6
Sep 18, 2015 01:57 AM
grabbem88
LT1 Based Engine Tech
23
Mar 18, 2015 01:25 PM




All times are GMT -5. The time now is 02:53 PM.