|
||
Here's what I have, what else to retard?JamesN1830 08-10-2002, 04:14 PM I have a MSD 6A ignition box. I always thought there was a modual of some sort that could control timming? What do I need to retard timming? ------------------ James 95 Z28 M6 -355 forged 11:1 motor and Nitrous Works Wet kit 125 shot :) s_willis 08-11-2002, 08:18 AM James, Do you have a way of logging runs? I log 0* ignition retard off the juice and upwards of 10 degrees on the juice. The PCM retards the timing all on it's own on my car. Try logging runs w/o and on the bottle to see what is going on. You may not need to buy any retard device. Skip ------------------ Michigan Skip's Flamed 95 (http://camaroz28.cardomain.com/id/s_willis) 95Z28, K&N TPIS 150hp NOS & 27mpg! MSD 6AL, Window switch,Ford SVO 24# injectors, 2.73's (3.42's to come) Edelbrock headers, Flowmaster exhaust BMR SFC,LCA,STB JamesN1830 08-11-2002, 10:18 AM I'm a 11:1 forged motor that is fresh. I don't want to take the chance. If a modual or something is ~$80 or so, then it is worth the insurance to me. I need this motor to last somewhat of a long time. ------------------ James 95 Z28 M6 -355 forged 11:1 motor and Nitrous Works Wet kit 125 shot :) RunRiot 08-13-2002, 08:19 AM MSD adjustable timing retard is ~$100 from Summit Racing. It hooks up to your MSD ignition. Retard 0-15 degrees by turning a knob. Tofus 93Z28 08-13-2002, 10:43 AM part number 8982 from summit is what i use...works with all 6 series msd ignitions..it is a single stage setup, it ties into the nitrous circuit, when it see 12 volts on the circuit it pulls timing...it has plug modules varying from 0 degrees and up...im using a 4 degree pill with my 150 shot... for safety sake i should be using a 6 degree pill , but on my scanner the 4 degree pill seems to be doing the job.... DO NOT let the OEM computer handle the timing control on nitrous... this is a disaster waiting to happen...0 knock is what you want to see even on the juice.... JamesN1830 08-13-2002, 12:27 PM I know not to let the cpu handle the timming job. I want to be safe and effective on this one. Anyone use summit part number msd-8680? http://store.summitracing.com/partdetail.asp?part=721 ------------------ James 95 Z28 M6 -355 forged 11:1 motor and Nitrous Works Wet kit 125 shot :) | ||