Would a 51mm and a 57mm offset work on my car?
The 18x9.5 51mm on the front will be fine. You can run anywhere from 40-56mm offset, with the 40mm pushing toward the outer edge of the fender opening, and the 56mm sitting about 5/8" further in. 51mm should sit aggressively in the wheel well.
With the 18x10.5 57mm offset, it will look "OK" but the inside of the tire will be very close to the inner fender liner, and may require a little hammering, and/or cutting the outer edge of the jounce bumper bracket off. Might not look quite as aggressive as the front wheel, but not that much difference.
With the 18x10.5 57mm offset, it will look "OK" but the inside of the tire will be very close to the inner fender liner, and may require a little hammering, and/or cutting the outer edge of the jounce bumper bracket off. Might not look quite as aggressive as the front wheel, but not that much difference.
Thread
Thread Starter
Forum
Replies
Last Post
fpete1992
General 1967-2002 F-Body Tech
1
Dec 11, 2014 03:51 PM
mspennyhughes
South Atlantic
0
Nov 28, 2014 03:22 PM



