Wheels and Tires For all wheel and tire and related discussion - Sponsored by Nitto Tire

What should i ask for these.

Thread Tools
 
Search this Thread
 
Old Apr 5, 2009 | 12:08 PM
  #1  
Conez's Avatar
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 31
From: CF, Iowa.
What should i ask for these.

im thinking about selling my rims to get cash for some motor mods and i was wondering what i should ask for them. 17" black zr1 rims.

Name:  zr1black06169.jpg
Views: 23
Size:  36.6 KB
Old Apr 5, 2009 | 01:07 PM
  #2  
Joe Bellman's Avatar
Registered User
 
Joined: Jan 2001
Posts: 372
From: Indy
OEM or copies? Condition? With tires?
Old Apr 5, 2009 | 02:12 PM
  #3  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Width and offset would also affect price.
Old Apr 5, 2009 | 02:32 PM
  #4  
mdacton's Avatar
Banned
 
Joined: Oct 2006
Posts: 4,970
From: Goochland, Va.
just sold a set of chrome ones 11 rears with tires for $800. tires were new, wheels were fairly new as well and mcguard stainless nuts
Old Apr 5, 2009 | 09:12 PM
  #5  
Conez's Avatar
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 31
From: CF, Iowa.
perfect condition. they are real. the ones in the back are like 12" wide and im not sure what the fornt ones are but they are a little smaller. w/o tires.
Old Apr 5, 2009 | 10:32 PM
  #6  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
OEM Grand Sport factory black wheels are 17x9.5 56mm front and 17x11 50mm rear. The width is measured inside the flanges where the tire beads sit, not on the outside of the flanges. If they are genuine, original GM wheels, they are worth more than the aftermarket replicas. I'd say find out what the replicas are selling for, and look for $50-100/wheel more than that.

Might want to visit a couple of Corvette sites. The 96 Grand Sport owner who is looking for a replacement set of wheels is going to be willing to pay a lot more than your average F-Body owner.
Old Apr 5, 2009 | 11:08 PM
  #7  
Conez's Avatar
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 31
From: CF, Iowa.
aight thanx i found my exact rims

http://www.oewheelsllc.com/Shop/Cont...0194/SFV/32400
Old Apr 6, 2009 | 09:55 PM
  #8  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Then they aren't "real". Disregard the comments about added value and other attributes of OEM wheels.
Old Apr 7, 2009 | 04:06 PM
  #9  
Bullet95z28's Avatar
Registered User
 
Joined: Jan 2009
Posts: 26
Originally Posted by Injuneer
OEM Grand Sport factory black wheels are 17x9.5 56mm front and 17x11 50mm rear. The width is measured inside the flanges where the tire beads sit, not on the outside of the flanges. If they are genuine, original GM wheels, they are worth more than the aftermarket replicas. I'd say find out what the replicas are selling for, and look for $50-100/wheel more than that.

Might want to visit a couple of Corvette sites. The 96 Grand Sport owner who is looking for a replacement set of wheels is going to be willing to pay a lot more than your average F-Body owner.
I thought the oem vette wheels were 36MM offset in the rear. I dont know though.
Old Apr 7, 2009 | 10:53 PM
  #10  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Originally Posted by Bullet95z28
I thought the oem vette wheels were 36MM offset in the rear. I dont know though.

Real ZR1 rear wheels are 36.5mm offset. They were silver. They were covered by the ZR1 rear fenders that were widened a couple inches on each side. The real 11" wide Grand Sport wheels were black, and had the 50mm offset, to move them deeper in the fenders. That was because the Grand Sport did not have the wider rear fenders, just a small plastic "eyebrow" on the fender lip to meet the minimum requirements for the tire to be inside the fender.
Old Apr 8, 2009 | 06:22 PM
  #11  
Bullet95z28's Avatar
Registered User
 
Joined: Jan 2009
Posts: 26
Sweet, i learn something new everyday. A guy used to bring his Grand Sport Vette into have work done on it all the time. That was a pretty car. It had those little eyebrow pieces on the fender. That car made me buy my wheels i have now. Thanks for that info!!
Old Apr 8, 2009 | 10:31 PM
  #12  
Conez's Avatar
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 31
From: CF, Iowa.
do you think 650ea. for those would be a good price? i got offered that yesturday. i was thinking a little more cause i just got brand new nitto 555r's on the back. with 3/y warranty.
Old Apr 9, 2009 | 08:44 PM
  #13  
yy's Avatar
yy
Registered User
 
Joined: Jun 2007
Posts: 207
From: The Motor City
$650 each? If so, that is way too high. If you have a sucker, I mean buyer to give you that price then sell them asap.
Old Apr 10, 2009 | 09:37 PM
  #14  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
AFS sells a set of 4 black Grand Sport wheels (2 17x9.5/2 17x11) with Vredestein tires for $1,149. They do have a wider machined lip, and do not look as good as the OEWheels, IMHO.

http://afswheels.com/storefrontprofi...68&i=232072236

Last edited by Injuneer; Apr 10, 2009 at 09:40 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Peytons'z
Parts For Sale
9
May 6, 2021 09:25 AM
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM
MadMav
Parts For Sale
8
Feb 6, 2015 11:02 PM
dbusch22
Parts For Sale
0
Jan 13, 2015 09:52 PM
95chwagon
Parts For Sale
4
Jan 13, 2015 09:19 PM




All times are GMT -5. The time now is 11:07 AM.