Need lugs for 3" 1/2" moser studs
09-23-2004, 01:21 PM
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: conshohocken
Posts: 641
Need lugs for 3" 1/2" moser studs
i just ordered the moser with the upgraded longer studs and i need to know where to find lugnuts for them open or closed i dont care.fred mentioned getting closed ones then drilling out the tops and tap them but does anyone make lugs that will fit these studs?
09-24-2004, 10:38 AM
#2
Administrator
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 70,671
Re: Need lugs for 3" 1/2" moser studs
What thread are the studs? Why so long?
Excaliber makes a 1/2-20 closed end duplex acorn that is 1.88" long, and another that is 2.5" long. I drilled out the 1.88" lugs for 3" studs. The 2.5" might work with the closed end on a 3.5" stud. It going to look like the lugs for a dualie wheel though.
Excaliber makes a 1/2-20 closed end duplex acorn that is 1.88" long, and another that is 2.5" long. I drilled out the 1.88" lugs for 3" studs. The 2.5" might work with the closed end on a 3.5" stud. It going to look like the lugs for a dualie wheel though.
Thread
Thread Starter
Forum
Replies
Last Post