I was wondering if the LS1 camaro ss rims would fit on my 95 z28.

 

Should be direct swap. I have 98 Z28 wheels on my 93 TA

 

Read the sticky!

 

Yes they will. you will have to make the center where the wheel fits on the hub slightly larger for the rear though. I used a dremel tool. The hubs on the 93-96 F-Bodys are slightly larger in the rear than the front.

 

You sure it isn't the other way around? I could swear my fronts go on the rear, but the rears won't fit on the front.

Either way... at MOST you'll have a LITTLE filing to do (like 1mm). Go for it.

 

Sweet, now i just have to start lookin on ebay for a set....how much do they normaly run for a set?...Also, if i mounted 315/35/17 tires on the ss rims, would it rub anywhere?

 

That is too wide of a tire for the size of the rim. go down to a 275 or a 285 at the absolute max. But even then, i still think that a 285 is too large. If you want to run a 315 then you need to get an 11" wide rim.

 

Yeah NO 315's... are the SS rims 16x8 or 17x9.5? I really can't remember. If they are 16x8, no higher than 255s... if they are 17x9.5, no higher than 285s.

 

Factory SS wheels are 17x9". 275/40 is the most appropriate tire size, and also the same size that was installed on them at the factory.

 

SS wheels were 17x9 on coupes, but 16" SS style wheels came on some convertibles - be careful on Ebay

 

The SS ten spoke, only came in a 17"x9".

 

Yeah, the "ZR1-style" SS wheels for the LT1 SS cars were available in a 16x8 version for the 'verts. But I've only seen the 10-spoke SS wheels in 17x9.