I have weld wheels 325-50-15 for the rear, I can get 15x8's with 4.5 back spacing will these fit the front with 235-50-15 ?

 

Really hard to answer without at least knowing the specifics of the car... like year/model.

Why not add a "signature" with basic info about the car - year, model, engine, tranny and any major mods? That way, every time you post, the required info will be automatically appended to the bottom of your post.

 

I don't know where my sig went, i guess I need to re install it now.
My car is a 94 Z28

 

I am running ZO6 wheels now but need more side wall. Sig Installed ,Thanks

 

The stock 16x8" 4th Gen wheels have a 6.67" backspace. That means the 15x8" Welds, with a 4.5" backspace will stick out at least 2" more than the stock wheels. That's going to put them outside the front fenders. You need a 5.5" backspace.

The 235/50-15 is only a 24.2" tire. That's too small for a 4th Gen. You want a tire closer to 26" diameter. A 235/60-15 would give you a 26.1" diameter.

 

Thanks for the info.