West South Central Arkansas, Louisiana, Oklahoma, and Texas

WTT/WTS - Firearms for Third gen

Thread Tools
 
Search this Thread
 
Old Mar 25, 2006 | 03:42 PM
  #1  
AndyJ's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 133
From: North Dallas
WTT/WTS - Firearms for Third gen

Would like to trade the following firearms for a 3rd Gen IROC or Z28. Most desirable would be an H.O. M5. Face to face trade only in Texas to keep the paperwork to a minimum. Guns are valued in the neighborhod of $2600 - $2900.

The Remington is a 700 Police Sniper Special 308 with
a JP recoil eliminator (http://www.jprifles.com),
Harris spring loaded bipod and Doskocil case.The scope
is a Springfield Armory 4x14 adjustable power, 30mm
main tube, 56mm objective. It has a long sunshade (I'd
say an easy 6" long) and removable flip up covers. It
is marked Springfield Armory, 2nd Generation
Government, 4x14x56. It has S.A's bullet drop
compensating reticle, calibrated for a 168gr boat
tail. I don't know the brand of the scope rings and
mount but they're heavy units, not wal-mart hardware.
Previous owner just got it back from SA and it has
been refreshed -- new internals and nitrogen gas
charge. Fired less than 200 rounds. Looking for $1400
Pictures here: More Pictures



The AR-15 is by PWA in 5.56. It's stamped Commando
Ser 40086 on the receiver. Most people associate
"commando" with a shortened M4 style gun, but this is
the full length version. It's completely stock, with
the required "post ban" flash suppressor. It has the
standard upper with iron sights adjustable for windage
and elevation. plus 3 30 rd mags and nylon case. It
may have a feeding problem. Less than 100 rounds
through it. Looking for $600. Pictures here:
More Pictures



The Kimber says Classic Stainless on the slide (Kimber
replaced their "classic" line with their "custom"
line...guess "classic" doesn't sound as expensive as
"custom"...), K037050 is the serial number. The laser
is a CTC model with the pressure switch on the right
side, plus a on/off on the underside of the grip
(next to where the magazine slides in). Its a full
size frame (I believe that makes it a 5" barrel?),
right hand only extended grip safety, extended
beavertail, non-adjustable beveled sights...it looks
exactly like the Custom TLE Stainless II on Kimber's
site except mine has the wrap around rubber grip.
Looks almost new.Comes with original box. Looking for
$750. Pictures here:
More Pictures

Old Mar 25, 2006 | 06:11 PM
  #2  
lt1aggie's Avatar
Registered User
 
Joined: Sep 2003
Posts: 431
From: b/cs; satx
Re: WTT/WTS - Firearms for Third gen

bump for some nice hardware!
Old Mar 26, 2006 | 12:24 AM
  #3  
AndyJ's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 133
From: North Dallas
Re: WTT/WTS - Firearms for Third gen

Originally Posted by lt1aggie
bump for some nice hardware!

Gracias!
Old Mar 29, 2006 | 10:26 AM
  #4  
AndyJ's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 133
From: North Dallas
Re: WTT/WTS - Firearms for Third gen

Kimber is sold
Old Mar 29, 2006 | 11:29 AM
  #5  
lt1aggie's Avatar
Registered User
 
Joined: Sep 2003
Posts: 431
From: b/cs; satx
Re: WTT/WTS - Firearms for Third gen

You don't happen to have a glock 19 you want to sell do you?
Old Mar 29, 2006 | 12:07 PM
  #6  
AndyJ's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 133
From: North Dallas
Re: WTT/WTS - Firearms for Third gen

Originally Posted by lt1aggie
You don't happen to have a glock 19 you want to sell do you?
No glocks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Dempsey
New Member Introduction
5
Mar 12, 2016 12:42 AM
HAWG
Drag Racing Technique
2
Sep 25, 2015 11:41 AM
Z Power
LT1 Based Engine Tech
8
Sep 19, 2015 11:19 PM




All times are GMT -5. The time now is 11:32 PM.