West South Central Arkansas, Louisiana, Oklahoma, and Texas

White leather, ABS module, LT1 brakes

Old Apr 21, 2004 | 06:58 PM
  #1  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
White leather, ABS module, LT1 brakes

I have a mint set of white leather REAR seats from a '99 SS. I will take $75.

ABS Module (big thing under hood that brake lines go to/from, not the booster). $30

Front LT1 brake calipers with rotors. Rotors have ONLY 500 miles on them. Pads are included that also have only 500 miles on them. $50

Rear LT1 calipers $30 Great to put on an LS1 F-car to clear for Prostars etc...

PM me or call tonight 940-648-0774 Derek C
Old Apr 21, 2004 | 10:45 PM
  #2  
Donohue96M6Z28's Avatar
Registered User
 
Joined: Mar 2003
Posts: 2,609
From: San Marcos, TEXAS
wheres 940 at? i might be interested in the front brakes
Old Apr 21, 2004 | 10:54 PM
  #3  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
Its Justin & Denton. I am in Justin right behind the Texas Motor Speedway off 35. Let me know so I can make time to take them off the car. It should only take less than an hour to do. The rear rotors are not for sale because I have to have them for the E-brake until I get the new brake systems.

Are you interested in all the brakes listed or just the fronts or rears?
Old Apr 21, 2004 | 11:19 PM
  #4  
Donohue96M6Z28's Avatar
Registered User
 
Joined: Mar 2003
Posts: 2,609
From: San Marcos, TEXAS
im interested in the front..but ya im not sure where tx motor speed way is..isnt that around dallas tho?
Old Apr 21, 2004 | 11:35 PM
  #5  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
Its at 114 and 35W. I think TMS physical address is technically Ft.Worth but its in Justin. They made its address Ft. Worth so the FW police have control during races. Its out past Roanoke and Westlake/Trophy Club.
Old Apr 22, 2004 | 02:36 AM
  #6  
KyleBlue85Iroc-Z's Avatar
Registered User
 
Joined: Mar 2001
Posts: 1,138
From: DFDub, TX
Originally posted by SupaChargdZ28
but ya im not sure where tx motor speed way is..isnt that around dallas tho?
It's the only giant thing that you can see from 10 miles both ways on 35! Well, actaully I guess Alliance is pretty big, but the speedway is HUGE.

It's outside of Ft. Worth. Northwest side. Probably a good 6 hourish drive from SA.
Old Apr 22, 2004 | 05:51 AM
  #7  
Donohue96M6Z28's Avatar
Registered User
 
Joined: Mar 2003
Posts: 2,609
From: San Marcos, TEXAS
lol thanks..nvm tho...too far...goodluck tho
Old Apr 22, 2004 | 06:24 AM
  #8  
Glenn98ZM6's Avatar
Registered User
 
Joined: Dec 2003
Posts: 350
From: Ft. Worth
i'm intrested in the rear brakes. i'm in ft. worth and can drop by any time.
Old Apr 22, 2004 | 04:38 PM
  #9  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
Give me a call tonight. I am going to go take them off right now so dont call for an hour. 940-648-0774 Ask for Derek
Old Apr 22, 2004 | 05:21 PM
  #10  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
I dont know what I was thinking! I can't take the rear calipers off because they are part of the E-Brake! For some reason I was thinking that the e-brake was like a drum system on the inside of the rotors. DUH, I'm an idiot. Well I will still sell you the rear brakes but you will have to wait until I get the car to its permanent location otherwise I wont have any brakes at all and its currently sitting on an incline.
Old Apr 22, 2004 | 07:01 PM
  #11  
Glenn98ZM6's Avatar
Registered User
 
Joined: Dec 2003
Posts: 350
From: Ft. Worth
thats cool. shoot me an email when your ready to give them up. are you parting out the car? any chance of letting the rear rotors, backing plates, or the entire rear go also?
Old Apr 22, 2004 | 07:45 PM
  #12  
'95 LS1 Z28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 106
I will need the rear end in it to move the car around. It has a 2 series carrier in it with 3.73 Strange gears though. If you would be interested in swapping a turnable rear with mine I will trade you for $150. Its a non TCS/ASR rear. The rotors can go too I guess since I won't need them. I dont care what gears you have because the car is going to get a 9" in a year or two after the motor and tranny setup is complete. I am just starting the project so thats why it will be a while. If you need the rear though its in perfect operating condition. I will have it moved by the end of April because we are putting the house up for sale and it cant be here.

Let me know.

Derek C
940-648-0774
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
squarehead
General 1967-2002 F-Body Tech
7
Jan 15, 2015 07:02 PM
bossco
Automotive News / Industry / Future Vehicle Discussion
4
Nov 29, 2014 10:18 AM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:03 AM.