DFW peeps: How much is the state inspection these days?
Mine is past due now. I've heard it being anywhere from $40 to $60. Exactly how much is it now? 
[This message has been edited by Pony Punisher II (edited September 09, 2002).]

[This message has been edited by Pony Punisher II (edited September 09, 2002).]
I'm not sure, but my SES light is on. I heard that would make you fail. Anybody else hear that??
------------------
1996 Polo Green Z28 A4
Green round Catz fog lights, flowmaster, Cut-out installed. New spoiler waiting to be painted. !TBB, Moroso CAI w/ K&N, Chrome salad shooters, Clear corners all around, and Edlebrock STB.
5% limo tint all around!
Waiting on "polly" for ported and polished MAF.
AOL IM Dtron75
ICQ# 6248331
------------------
1996 Polo Green Z28 A4
Green round Catz fog lights, flowmaster, Cut-out installed. New spoiler waiting to be painted. !TBB, Moroso CAI w/ K&N, Chrome salad shooters, Clear corners all around, and Edlebrock STB.
5% limo tint all around!
Waiting on "polly" for ported and polished MAF.
AOL IM Dtron75
ICQ# 6248331
I was told the SES light for any of the last two cycles on the ECM will fail you? I don't have any idea what that means, but was told that if you drive the car around for a couple of days that would be enough time to clear the log. I too would appreciate some add'l info specifics...
I failed mine badly, but just paid the guy off and we were both happy. Good ol' Jiffy Lube!
------------------
95' Formula M6
http://camaroz28.cardomain.com/id/silverbulletm6
------------------
95' Formula M6
http://camaroz28.cardomain.com/id/silverbulletm6
<font face="Verdana, Arial" size="2">I was told the SES light for any of the last two cycles on the ECM will fail you? </font>
For '95 or older:
Your car has to pass the IM240 emissions standard. Which is similar to the old test except your car is on a dyno to simulate a load on the engine.
For '96 or newer:
What the computer looks for is that the MIL indicator indicates "0" (not illuminated) and that the OBDII diagnostic checks have been completed. I believe there are 7 checks that must be completed.
If you disconnect your PCM from its power supply, you must complete several OBDII driving cycles (http://www.obdii.com/drivecycle.html) to reset each of these diagnostic indicators.
At least this is how I understand it to work. Perhaps someone more knowledgeable will chime in.
And its $39.99 but Jiffy Lube is doing them for $34.99.
--
Ronnie
[This message has been edited by Rlhay2 (edited September 10, 2002).]
Re: DFW peeps: How much is the state inspection these days?
Originally posted by Pony Punisher II
Mine is past due now. I've heard it being anywhere from $40 to $60. Exactly how much is it now?
[This message has been edited by Pony Punisher II (edited September 09, 2002).]
Mine is past due now. I've heard it being anywhere from $40 to $60. Exactly how much is it now?

[This message has been edited by Pony Punisher II (edited September 09, 2002).]
hope that helps.
shokor
Re: Re: DFW peeps: How much is the state inspection these days?
Catalytic converter failure
Faulty gas cap
Fuel metering out of spec
Incorrect ignition timing
Inoperative injection system and/or thermostatic air cleaner
Mis-routed vacuum lines
Faulty Positive Crankcase Ventilation (PCV) System or Exhaust Gas Recirculation (EGR) System
the price is set by the state. i don't recall what it is, but you cannot pay more or less for this inspection.
Faulty gas cap
Fuel metering out of spec
Incorrect ignition timing
Inoperative injection system and/or thermostatic air cleaner
Mis-routed vacuum lines
Faulty Positive Crankcase Ventilation (PCV) System or Exhaust Gas Recirculation (EGR) System
the price is set by the state. i don't recall what it is, but you cannot pay more or less for this inspection.
Re: Re: Re: DFW peeps: How much is the state inspection these days?
Originally posted by DomesticViolence
the price is set by the state. i don't recall what it is, but you cannot pay more or less for this inspection.
the price is set by the state. i don't recall what it is, but you cannot pay more or less for this inspection.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
BandDirector Blk98ZM6
Parts For Sale
2
Feb 20, 2015 07:42 AM



