I have a set of LT1 heads ported by Lloyd Elliot of Dallas along with the intake. The valves are Manley Pro race valves 2.02/1.60, and the springs are Crane's dual springs good up to .600 lift. The heads were milled a ltttle and the cc are still stock, Lloyd did do a 5 angle valve goob. I have the flow sheet and Speedtek also has my flow sheet but at .600 lift flowed at 282 but i can find my sheet to get the rest of the numbers. Less than 500 miles on the heads. Not selling rockers or push rods just the heads.

The intake was just powdered coated red by Enduro Coatings in Mesquite very nice job. Lloyd also ported the intake to match the heads and the 52mm TB. No fuel rails or TB will be sold just the intake.

These parts are still on the car and running fine, no damage has been done to the heads or intake. Ran some good numbers with these heads 7.60's N/A @ 91mph with a CC306 cam and mild 355, 10.9 to 1 cr. and all bolt-ons.

Just throw me some offers im looking to step up to a set of AFR 220's or a nice set of ported LT4's.

I can get some pics of the intake if needed.
Thanks Lance

**********************************
UPDATE!!!
Other guy flaked out
Here is what i want to sell as a package

I will sale the heads complete (springs, valves, Comp pro Magnum 1.6 RR's, Comp hardend push rods) and even the Comp 306 cam and with the RED coated LT1 intake
1500.00
Also will add a BBK/Edelbrock 52mm TB for a 100.00
1600.00

This is a killer top end package no doubt, but its just not the right combo for my new 396 going to the new Trick flow heads

 

I tried to reply to your PM, but your inbox is full

 

PM box is empty, sorry!!

 

sent an email

 

Sell me you 10 bolt with 4.56's.

 

The heads maybe be sold i will post on Sunday to let everyone know if the deal goes thru or not.

TEAL94Z28 your right on time i will sell the 10 bolt it has a brand new set of Richmond 4.56's w/ BMR Relocation brackets welded in, Mac Alum cover. I did remove the emg brakes and cables and brackets i will sell for 500 and i will deliver!

 

I was think more around 300... I didnt know it has relocation brackets and the aluminum cover. I has a rear with 3.73's and a stock rear with 3.23's maybe we can work somethen out???

 

I have
125 in the cover
80 in reolocation brackets
200 in new 4.56's
another 175 in the SLP Posi unit

Thats 580 not including the rear and labor installing these parts, give me 450 and i will bring it to you in NRH

 

Do you still have them?

 

Update!!
Look at the first post
^^^^^^^^^^^^